Shenzhen Tec-Key Technology Co., Ltd. 86-755-89372016 jd@tec-key.com
2U Case Metal Laser Cutting Processing Galvanized Sheet Bending Welding Processing

2U Case Metal Laser Cutting Processing Galvanized Sheet Bending Welding Processing

  • 하이 라이트

    2U Laser Cutting Processing

    ,

    Galvanized Laser Cutting Processing

    ,

    AL6063 Laser Cutting Bending

  • 재료
    AL6063/ AL5052 알루미늄, 스테인레스 강, SECC, 탄소강, SPTE
  • 다음을 완성했습니다
    애노드 산화를 분사기로 닦기
  • Silver/red/black/colorful
  • 염수 분무 시험
    96 H
  • 허용한도
    ISO2768FH
  • 절차
    제조 공정에 있는 제품과 정밀에 따르면 CNC 부분, 회전한 CNC 분쇄를 돌린 Cnc 기계가공
  • 원래 장소
    중국 센즈헨
  • 브랜드 이름
    Tec-Key
  • 인증
    ISO9001:2015
  • 모델 번호
    654231
  • 최소 주문 수량
    100 PC
  • 가격
    USD0.5-30 pcs
  • 포장 세부 사항
    32*23*17cm
  • 배달 시간
    5-8 작업 일수
  • 지불 조건
    전신환
  • 공급 능력
    10000 PC 일

2U Case Metal Laser Cutting Processing Galvanized Sheet Bending Welding Processing

2U case metal laser cutting processing galvanized sheet bending and welding processing
 
AISI 1018 Mild/Low Carbon Steel
AISI 1018 mild/low carbon steel has excellent weldability and produces a uniform and harder case and it is considered as the best steel for carburized parts. AISI 1018 mild/low carbon steel offers a good balance of toughness, strength and ductility. Provided with higher mechanical properties, AISI 1018 hot rolled steel also includes improved machining characteristics and Brinell hardness.
 
Specific manufacturing controls are used for surface preparation, chemical composition, rolling and heating processes. All these processes develop a supreme quality product that are suited to fabrication processes such as welding, forging, drilling, machining, cold drawing and heat treating.
 
hemical Composition

Element Content
Carbon, C 0.14 - 0.20 %
Iron, Fe 8.81 - 99.26 % (as remainder)
Manganese, Mn 0.60 - 0.90 %
Phosphorous, P ≤ 0.040 %
Sulfur, S ≤ 0.050 %

 
Physical Properties

Physical Properties Metric Imperial
Density 7.87 g/cc 0.284 lb/in3

 
Mechanical Properties

Mechanical Properties Metric Imperial
Hardness, Brinell 126 126
Hardness, Knoop (Converted from Brinell hardness) 145 145
Hardness, Rockwell B (Converted from Brinell hardness) 71 71
Hardness, Vickers (Converted from Brinell hardness) 131 131
Tensile Strength, Ultimate 440 MPa 63800 psi
Tensile Strength, Yield 370 MPa 53700 psi
Elongation at Break (In 50 mm) 15.0 % 15.0 %
Reduction of Area 40.0 % 40.0 %
Modulus of Elasticity (Typical for steel) 205 GPa 29700 ksi
Bulk Modulus (Typical for steel) 140 GPa 20300 ksi
Poissons Ratio (Typical For Steel) 0.290 0.290
Machinability (Based on AISI 1212 steel. as 100% machinability) 70 % 70 %
Shear Modulus (Typical for steel) 80.0 GPa 11600 ksi

 
Electrical Properties

Electrical Properties Metric English Comments
Electrical resistivity @0°C (32°F) 0.0000159 Ω-cm 0.0000159 Ω-cm annealed condition
@100 °C/ 212 °F 0.0000219 Ω-cm 0.0000219 Ω-cm annealed condition
@ 200 °C/392 °F 0.0000293 Ω-cm 0.0000293 Ω-cm annealed condition

 
 
AISI 1018 Mild/Low Carbon Steel
AISI 1018 mild/low carbon steel has excellent weldability and produces a uniform and harder case and it is considered as the best steel for carburized parts. AISI 1018 mild/low carbon steel offers a good balance of toughness, strength and ductility. Provided with higher mechanical properties, AISI 1018 hot rolled steel also includes improved machining characteristics and Brinell hardness.
 
Specific manufacturing controls are used for surface preparation, chemical composition, rolling and heating processes. All these processes develop a supreme quality product that are suited to fabrication processes such as welding, forging, drilling, machining, cold drawing and heat treating.
 
Applications of AISI 1018 Mild/Low Carbon Steel
A:It is used in bending, crimping and swaging processes.
B:Carburized parts that include worms, gears, pins, dowels, non-critical components of tool and die sets, tool holders, pinions, machine parts, ratchets, dowels and chain pins use AISI 1018 mild/low carbon steel.
C:It is widely used for fixtures, mounting plates and spacers.
D:It is suitably used in applications that do not need high strength of alloy steels and high carbon.
E:It provides high surface hardness and a soft core to parts that include worms, dogs, pins, liners, machinery parts, special bolts, ratchets, chain pins, oil tool slips, tie rods, anchor pins, studs etc.
F:It is used to improve drilling, machining, threading and punching processes.
G:It is used to prevent cracking in severe bends
 
Machining
The machinability of AISI 1018 mild/low carbon steel is graded at 78% of B1112.
 
Weldability
AISI 1018 mild/low carbon steel can be instantly welded by all the conventional welding processes. Welding is not recommended for AISI 1018 mild/low carbon steel when it is carbonitrided and carburized.
 
Low carbon welding electrodes are to be used in the welding procedure, and post-heating and pre- heating are not necessary. Pre-heating can be performed for sections over 50 mm. Post-weld stress relieving also has its own beneficial aspects like the pre-heating process.
 
Heat Treatment
The heat treatment for AISI 1018 mild/low carbon steel consists of the following processes:
 
Normalizing
AISI 1018 mild/low carbon steel should be heated at 890°C – 940°C and then cooled in still air.
 
Forging
This process requires heating between 1150°C – 1280°C and AISI 1018 mild/low carbon steel is held until the temperature becomes constant.
3900°C is the minimum temperature required for the forging process.The steel is then cooled in air after this process.
 
Tempering
AISI 1018 mild/low carbon steel is tempered at between 150°C – 200°C for improvement of case toughness. This process has little or no effect
 
on hardness.
The occurrence of grinding cracks is reduced when AISI 1018 mild/low carbon steel is tempered at the above mentioned temperature.
 
Annealing
The AISI 1018 mild/low carbon steel is heated at 870°C – 910°C and allowed to cool in a furnace
 
Stress Relieving
500°C – 700°C is required to relieve stress in AISI 1018 mild/low carbon steel that is later cooled down in still air.
 
Case Hardening
This process requires heating to be carried out between 780°C – 820°C. AISI 1018 mild/low carbon steel is then quenched in water.
 
Core Refining
This is an optional process that requires heating at 880°C – 920°C.
AISI 1018 mild/low carbon steel after being heated is moistened in oil or water.
 
Carburizing
Carburizing takes place at 880°C – 920°C.
 
 
2U Case Metal Laser Cutting Processing Galvanized Sheet Bending Welding Processing 02U Case Metal Laser Cutting Processing Galvanized Sheet Bending Welding Processing 12U Case Metal Laser Cutting Processing Galvanized Sheet Bending Welding Processing 22U Case Metal Laser Cutting Processing Galvanized Sheet Bending Welding Processing 32U Case Metal Laser Cutting Processing Galvanized Sheet Bending Welding Processing 42U Case Metal Laser Cutting Processing Galvanized Sheet Bending Welding Processing 5